Campagnola Pruning Equipment
Founded in Bologna in 1958, Campagnola occupies a leading position in the world market of pneumatic pruning and harvesting systems. Recently it has also entered the market of oil mills and of electronic tools for pruning.
Electronic Pruner - Cobra For Orchards
Cobra electronic shear for orchards. Operated by a very light lithium battery,carried in a comfortable backpack, it offers 3 cutting modes, and SERVICE mode.
Technical data
Cobra electronic shear for orchards. Operated by a very light lithium battery,carried in a comfortable backpack, it offers 3 cutting modes, and SERVICE mode.
- 100% Automatic Mode: The mobile blade reaches the maximum opening and then closes up automatically, as soon as the operating lever is touched. The shear can cut 35 mm diameter branches very quickly.
- 70% Automatic Mode: With the same operation the mobile blade opens only 70% to increase the cutting speed.
- Proportional Mode: This is the recommended mode for precision tasks and for the first few days after buying the shear, since it allows the operator to get used to it. In fact, the result is a progressive cut, since the mobile blade movement is controlled by the operator’s finger pressure on the trigger. Therefore, the tool is used as if it were a manual shear. This mode guarantees excellent safety while cutting.
- Service Mode: This mode gives information about the blade adjustment and the number of cuts, helping with the maintenance analysis.
Technical data
- Shear weight: 914 g
- Battery: 2860 g
- Cutting capacity: Ø 35 mm
- Battery voltage: 51 V
- Battery endurance: 15 hours
- Ergonomic body/hand grip unit with anti-slip rubber part
- Automatic, electronically controlled battery-charger
Electronic Pruner - Cobra For Vineyards
Cobra electronic shear for pruning vineyards. This is the same specification as the Cobra Orchard, but with a different blade suited to vines.
Cobra electronic shear for pruning vineyards. This is the same specification as the Cobra Orchard, but with a different blade suited to vines.
Pony Vineyard
PONY is the lightest, fastest and easiest-to-handle electronic shear by Campagnola. Designed for vineyard pruning, It is characterised by highly reduced dimensions and an innovative blade. This pruner is much lighter which is ideal for the younger vineyard.
Technical data
PONY is the lightest, fastest and easiest-to-handle electronic shear by Campagnola. Designed for vineyard pruning, It is characterised by highly reduced dimensions and an innovative blade. This pruner is much lighter which is ideal for the younger vineyard.
Technical data
- Shear weight: 770 g
- Battery: 2100 g
- Cutting capacity: Ø 25 mm
- Battery voltage: 51 V
- Battery endurance: 9/12 hours
- Ergonomic body/hand grip unit with anti-slip rubber part
- Automatic, electronically controlled battery-charger
Pneumatic Pruners
Mod M/3
Pneumatic chain saw Autolube
AUTOLUBE is a pneumatic pruner with a self-lubrication system for the chain. Powerful and yet light and easy to use it is fitted on an extension pole allowing branches up to 150mm in diam. up to 5m in height to be cut. Available with 8" bar and 1/4" chain. It is supplied with an adapter for fitting on the extension pole.
Pneumatic chain saw Autolube
AUTOLUBE is a pneumatic pruner with a self-lubrication system for the chain. Powerful and yet light and easy to use it is fitted on an extension pole allowing branches up to 150mm in diam. up to 5m in height to be cut. Available with 8" bar and 1/4" chain. It is supplied with an adapter for fitting on the extension pole.
F/4
The F/4 pneumatic shears can cut thick branches (up to 35 mm diam.) of notoriously hard woods with minimum effort. Sturdy and powerful, they are the ideal shears for problem-free use over long periods. The body/cylinder is made of magnesium casting. Campagnola recommends to use F/4 connected to an extension pole.
The F/4 pneumatic shears can cut thick branches (up to 35 mm diam.) of notoriously hard woods with minimum effort. Sturdy and powerful, they are the ideal shears for problem-free use over long periods. The body/cylinder is made of magnesium casting. Campagnola recommends to use F/4 connected to an extension pole.
Star 30V
Vineyard blade version
The considerable power generated by 2 in-line pistons inside two brass sleeves provides 185 kg of pushing power to the blade, while maintaining a fast 2 cutting stroke/second rate. The double piston system grants great power and reduced hand grip diameter, and eliminates the kickback effect against the operator’s arm. The remarkably comfortable hand grip is due to the reduced outer diameter (42 mm only). The blades are made of forged steel, heat treated for a suitably time-lasting cutting hedge sharpness, while yielding flexibility and withstanding rough handling. The sharpening operation is still carried out manually.
Vineyard blade version
The considerable power generated by 2 in-line pistons inside two brass sleeves provides 185 kg of pushing power to the blade, while maintaining a fast 2 cutting stroke/second rate. The double piston system grants great power and reduced hand grip diameter, and eliminates the kickback effect against the operator’s arm. The remarkably comfortable hand grip is due to the reduced outer diameter (42 mm only). The blades are made of forged steel, heat treated for a suitably time-lasting cutting hedge sharpness, while yielding flexibility and withstanding rough handling. The sharpening operation is still carried out manually.
Laser Chainsaw
Pneumatic pruner featuring a chain self-lubrication system. Powerful, but light and easy to use, it doesn’t tire the operator even after many hours of work and during difficult cutting situations. Excellent both with direct handle grip and fitted on the extension pole with which you can cut branches 200 mm thick up to 5 metres high.
Two models available: with 8"or 10" bar and with 1/4" chain. Both are fitted with an exclusive bar that limits kickback during cutting.
Pneumatic pruner featuring a chain self-lubrication system. Powerful, but light and easy to use, it doesn’t tire the operator even after many hours of work and during difficult cutting situations. Excellent both with direct handle grip and fitted on the extension pole with which you can cut branches 200 mm thick up to 5 metres high.
Two models available: with 8"or 10" bar and with 1/4" chain. Both are fitted with an exclusive bar that limits kickback during cutting.
- Can be fitted on extension pole.
- Hand-guard with chain brake to avoid kickback.
- Magnesium motor body, improves heat exchange to avoid that the condensation freezes at low temperatures.
- Automatic chain lubrication oil tank.
- Handle grip with active and passive safety devices.
Black Star
Black Star is ideal for any kind of pruning operations.
Some of its main features are cutting speed, blades-and-body alignment and easy maintenance; moreover, the shear is fitted with a valve body made of magnesium, favouring the heat exchange in order to prevent condensed water from freezing at low temperature.
Black Star is ideal for any kind of pruning operations.
Some of its main features are cutting speed, blades-and-body alignment and easy maintenance; moreover, the shear is fitted with a valve body made of magnesium, favouring the heat exchange in order to prevent condensed water from freezing at low temperature.
Star 30F
Orchard blade version
The considerable power generated by 2 in-line pistons inside two brass sleeves provides 185 kg of pushing power to the blade, while maintaining a fast 2 cutting stroke/second rate. The double piston system grants great power and reduced hand grip diameter, and eliminates the kickback effect against the operator’s arm. The remarkably comfortable hand grip is due to the reduced outer diameter (42 mm only). The blades are made of forged steel, heat treated for a suitably time-lasting cutting hedge sharpness, while yielding flexibility and withstanding rough handling. The sharpening operation is still carried out manually
Orchard blade version
The considerable power generated by 2 in-line pistons inside two brass sleeves provides 185 kg of pushing power to the blade, while maintaining a fast 2 cutting stroke/second rate. The double piston system grants great power and reduced hand grip diameter, and eliminates the kickback effect against the operator’s arm. The remarkably comfortable hand grip is due to the reduced outer diameter (42 mm only). The blades are made of forged steel, heat treated for a suitably time-lasting cutting hedge sharpness, while yielding flexibility and withstanding rough handling. The sharpening operation is still carried out manually
Star 35
For pruning orchards and for green areas
STAR 35 is a traditional pneumatic shear with single piston and spring return, but with an impressive performance rating. The 212 kg pushing power to the blade and the swift rate of 3 cutting strokes/second are difficult targets to match.
The blades are made of forged steel, heat treated for a suitably time-lasting cutting hedge sharpness, while yielding flexibility and withstanding rough handling. The sharpening operation is still carried out manually. The adapter allows to connect the shear to an extension pole without disassembling the tool. For its features, STAR 35 (35 mm cuts) is an excellent shear for pruning orchards and for the green area maintenance.
For pruning orchards and for green areas
STAR 35 is a traditional pneumatic shear with single piston and spring return, but with an impressive performance rating. The 212 kg pushing power to the blade and the swift rate of 3 cutting strokes/second are difficult targets to match.
The blades are made of forged steel, heat treated for a suitably time-lasting cutting hedge sharpness, while yielding flexibility and withstanding rough handling. The sharpening operation is still carried out manually. The adapter allows to connect the shear to an extension pole without disassembling the tool. For its features, STAR 35 (35 mm cuts) is an excellent shear for pruning orchards and for the green area maintenance.
Star 30TB
Anvil cut version
The considerable power generated by 2 in-line pistons inside two brass sleeves provides 185 kg of pushing power to the blade, while maintaining a fast 2 cutting stroke/second rate. The double piston system grants great power and reduced hand grip diameter, and eliminates the kickback effect against the operator’s arm. The remarkably comfortable hand grip is due to the reduced outer diameter (42 mm only). The blades are made of forged steel, heat treated for a suitably time-lasting cutting hedge sharpness, while yielding flexibility and withstanding rough handling. The sharpening operation is still carried out manually.
Anvil cut version
The considerable power generated by 2 in-line pistons inside two brass sleeves provides 185 kg of pushing power to the blade, while maintaining a fast 2 cutting stroke/second rate. The double piston system grants great power and reduced hand grip diameter, and eliminates the kickback effect against the operator’s arm. The remarkably comfortable hand grip is due to the reduced outer diameter (42 mm only). The blades are made of forged steel, heat treated for a suitably time-lasting cutting hedge sharpness, while yielding flexibility and withstanding rough handling. The sharpening operation is still carried out manually.
Super STAR 2 P/5
For any kind of pruning operation
It has inherited from the world wide famous Super Star the high qualities which have determined its success: Speed, blade group in line with the shear body and easy maintenance. The new Super Star 2 has obviously been improved, such as in its cutting capacity, which is 31 mm. It is ideal for any kind of pruning operation.
Additional technical data is: double operating air trigger with active safety catch: 30% less effort; ice-free valve; con rod guard with sealed front for the total protection of the inner parts; new line-up of piston/con rod and blades: +15% power; new fixing system for the blades group
Super Star 2 an be fitted onto an extension pole to cut branches up to 5 m above the ground without any need for a ladder.
For any kind of pruning operation
It has inherited from the world wide famous Super Star the high qualities which have determined its success: Speed, blade group in line with the shear body and easy maintenance. The new Super Star 2 has obviously been improved, such as in its cutting capacity, which is 31 mm. It is ideal for any kind of pruning operation.
Additional technical data is: double operating air trigger with active safety catch: 30% less effort; ice-free valve; con rod guard with sealed front for the total protection of the inner parts; new line-up of piston/con rod and blades: +15% power; new fixing system for the blades group
Super Star 2 an be fitted onto an extension pole to cut branches up to 5 m above the ground without any need for a ladder.
F/6 U - STAR 50
The Most Powerful Loppers
The most powerful loppers in the Campagnola range can prune branches up to 50 mm thick with a minimum effort. They are matchless for any cutting operations thanks to the special profile of the straight or hooked blades. F/6 is the ideal tool for forestry pruning use and for green area maintenance. These loppers are the only Campagnola shears with “double action”: the blades are operated by compressed air for both cutting and blade opening stroke.
The new pneumatic lopper STAR 50. For those who have to carry out hard operations such as forestry pruning or green areas maintenance, the new pneumatic lopper STAR 50, which is the strongest Campagnola shear, is the best tool. It is the direct evolution of the previous F/6 U and D models and its new forged steel blades group is its power point, being a guarantee for strength and hold on the branch. STAR 50 can carry out 50 mm cuts and is available in various lengths, up to 3 metres. It is the only Campagnola shear with “double action”: the blades are operated by compressed air for both cutting and blade opening strokes.
The Most Powerful Loppers
The most powerful loppers in the Campagnola range can prune branches up to 50 mm thick with a minimum effort. They are matchless for any cutting operations thanks to the special profile of the straight or hooked blades. F/6 is the ideal tool for forestry pruning use and for green area maintenance. These loppers are the only Campagnola shears with “double action”: the blades are operated by compressed air for both cutting and blade opening stroke.
The new pneumatic lopper STAR 50. For those who have to carry out hard operations such as forestry pruning or green areas maintenance, the new pneumatic lopper STAR 50, which is the strongest Campagnola shear, is the best tool. It is the direct evolution of the previous F/6 U and D models and its new forged steel blades group is its power point, being a guarantee for strength and hold on the branch. STAR 50 can carry out 50 mm cuts and is available in various lengths, up to 3 metres. It is the only Campagnola shear with “double action”: the blades are operated by compressed air for both cutting and blade opening strokes.
