SINGLE ORCHARD PRUNER
Cutters used for mechanized cutting of trees during the growing season and can be used both for mechanized cutting of fruit or ornamental trees, as well as for pruning around the field or forest roads. The base of the machine is equipped with a robust set of strip cutting saw blades mounted on the lifting arm is made of thick-walled steel sections.
Saw blades for cutting blades are driven by a powerful hydraulic motor with power distribution to individual rotors using belt transmission. It provides not only energy transfer between the drive and hydraulic motor rotors, but also serves as a circuit breaker to prevent overloading the machine during cutting.
Saw blades for cutting blades are driven by a powerful hydraulic motor with power distribution to individual rotors using belt transmission. It provides not only energy transfer between the drive and hydraulic motor rotors, but also serves as a circuit breaker to prevent overloading the machine during cutting.
The cutting blades can be supplied either separately (and aggregated with its own arm) or including the lifting arm as a complete machine. The movement of the lifting arm provides a powerful hydraulic cylinder control using a specially assembled electro-hydraulic circuit. The design of the control panel is easy to use and convenient location of the controls in the tractor cab.
The electrohydraulic control all functional parts allows a high variability in the selection of the drive unit and if sufficient hydraulic power can propel OSTRATICKÝ wood cutters directly from the hydraulic system of the tractor or vehicle on which the cutter is suspended. Tractor carriers, which do not have sufficient hydraulic power required for reliable and smooth operation of the cutter can be supplemented by an independent source of hydraulic power driven from the PTO shaft of the tractor. This solution allows better positioning of the machine and the power saw blades and further increases the working performance of the machine.
The maximum safe movement outside the mechanical design care also locks fitted as standard hydraulic cylinders, which, even in the case of source failure or damage some of the functional parts to prevent the fall of the work tool to the ground and its destruction. OSTRATICKÝ SL1 wood cutters are manufactured in the rear suspension design for the rear hitch, on request, the machine can also be mounted on the front of the tractor three-point hitch system or carrier.
The electrohydraulic control all functional parts allows a high variability in the selection of the drive unit and if sufficient hydraulic power can propel OSTRATICKÝ wood cutters directly from the hydraulic system of the tractor or vehicle on which the cutter is suspended. Tractor carriers, which do not have sufficient hydraulic power required for reliable and smooth operation of the cutter can be supplemented by an independent source of hydraulic power driven from the PTO shaft of the tractor. This solution allows better positioning of the machine and the power saw blades and further increases the working performance of the machine.
The maximum safe movement outside the mechanical design care also locks fitted as standard hydraulic cylinders, which, even in the case of source failure or damage some of the functional parts to prevent the fall of the work tool to the ground and its destruction. OSTRATICKÝ SL1 wood cutters are manufactured in the rear suspension design for the rear hitch, on request, the machine can also be mounted on the front of the tractor three-point hitch system or carrier.
|
Type |
PNP 040 |
PNP 050 |
PNP 240 |
PNP 250 |
|
Number of saw blades (rotors): |
||||
|
The top bar |
0 |
0 |
2 |
2 |
|
The vertical bar |
4 |
5 |
4 |
5 |
|
The bottom line |
0 |
0 |
0 |
0 |
|
Working width |
2 Rotor Blades = 70 cm |
|||
|
3 rotor blades = 100 cm |
||||
|
4 rotor blades = 130 cm |
||||
|
5 rotor blades = 160 cm |
||||
|
Slinging post |
Type the U.S. |
|||
|
hydraulic lift, hydraulic tilting |
||||
|
The technical data are informative,
the manufacturer reserves the right to change the design of machinery and
equipment without prior notice. |
||||
Accessories:
Arm suspension on the front end loader, mulching head, independent hydraulic unit.