Rinieri Vine Trimmers And Pruning Machines
Pruning Machines / Vine Trimmers
CRL
The CRL cutting system with double movement of blade and tooth is assembled on the same frame of simple pruning machines. This scissors like system performs a perfect cut and this particular bar also allows pre-pruning to be done in winter time.
Options
The CRL cutting system with double movement of blade and tooth is assembled on the same frame of simple pruning machines. This scissors like system performs a perfect cut and this particular bar also allows pre-pruning to be done in winter time.
Options
- Flow regulator
- Solenoid valve control unit and remote control
- Shoot conveyer with flexible arms
- Upper and lower head hydraulic joint
- Independent hydraulic central control system
CRV
CRV performs very good summer pruning in the vineyard. The completely hydraulic multipurpose frame is equipped with a spring shockproof system; both versions simple and double are front mount. All shifting are provided with wear-proof bushing. The rotation high speed allows a perfect pruning even in the presence of very developed weeds. Steel blades and the machines are manufactured in compliance with the strictest safety regulations.
CRV performs very good summer pruning in the vineyard. The completely hydraulic multipurpose frame is equipped with a spring shockproof system; both versions simple and double are front mount. All shifting are provided with wear-proof bushing. The rotation high speed allows a perfect pruning even in the presence of very developed weeds. Steel blades and the machines are manufactured in compliance with the strictest safety regulations.
- Flow regulator
- Solenoid valve control unit and remote control
- Shoot conveyer with flexible arms
- Upper and lower head hydraulic joint
- Independent hydraulic central control system
CRS
In winter time, in order to perform the pre-pruning, it is possible to assemble one or more horizontal bars on the double blade pruning machine. All bars are equipped with a shockproof articulation with a gaz spring-loaded bumper for return. Pre-pruning machines enable a clean cut even of the strongest vine shoots
In winter time, in order to perform the pre-pruning, it is possible to assemble one or more horizontal bars on the double blade pruning machine. All bars are equipped with a shockproof articulation with a gaz spring-loaded bumper for return. Pre-pruning machines enable a clean cut even of the strongest vine shoots
Binger Vine Trimmers And Pruning Machines
Pruning Machines / Vine Trimmers
LSA-320 AL2
The standard cutting arm length is 1.52 metres vertically (6 knives) and 0.56 m horizontally (2 knives); a seventh vertical knife is available as an option at extra cost. The centre distance of the cutting-rotor-blades is 24 cm and the knife diameter is 32 cm, giving an overlap of 8 cm. This gives perfect cutting results even with large leaf-walls. All knives are tilted 5° to the leaf wall, so only the knife-ends cut and the annoyance from leaf-particles flying about is lower than ever before. The cut is exceptionally clean as the knives are curved evenly and the smooth side of the knife is always turned to the leaf-wall. There is a rubber shield which stops the cut leaves falling on the tractor driver, but protective glasses and dust mask should be worn.
The knives are driven via flat-belts from hydraulic geared motors; separate motors for horizontal and vertical cutters. The belts and the ball-bearings are maintenance-free. The rpm is between 2500 and 3000. It runs without vibration.
The model AL2 requires an oil flow of 13 to 15 litres per minute, with between 60 and 110 Bar pressure. To avoid over-heating of the oil, there should be more than 5 litres of oil in the tractor hydraulic reservoir. The maximum permitted oil pressure in the motor intake and hydro cylinders is 210 bar; the maximum in the motor return feed is 1.5 bar. For this hydraulic drive a one-way spool-valve is necessary (there is usually one on the tractor). When coupling to this valve it is important that the oil returns directly and freely back to the reservoir (not via the spool-valve) so that the oil stays cooler.
The height setting is hydraulically controlled; the vertical height adjustment distance is 80 cm. A one-way double-acting spool-valve is necessary on the tractor for the hydraulic height setting.
There is also hydraulic operation for side tilt adjustment (+- 20 degrees); a third (double-acting) spool-valve is needed. These two spool-valves are usually together in a unit which mounts forward of the driver (to his right-hand-side), this is like a gear-stick with forward and backward movement to control the height and side to side movement to control the side-tilt.
Included is an adaptor for the tractor and a storage frame to assist in safely fitting and removing the implement.
There are models for right or left side mounting.
The total weight is 125 kilos, but this is for the 3 parts.
The standard cutting arm length is 1.52 metres vertically (6 knives) and 0.56 m horizontally (2 knives); a seventh vertical knife is available as an option at extra cost. The centre distance of the cutting-rotor-blades is 24 cm and the knife diameter is 32 cm, giving an overlap of 8 cm. This gives perfect cutting results even with large leaf-walls. All knives are tilted 5° to the leaf wall, so only the knife-ends cut and the annoyance from leaf-particles flying about is lower than ever before. The cut is exceptionally clean as the knives are curved evenly and the smooth side of the knife is always turned to the leaf-wall. There is a rubber shield which stops the cut leaves falling on the tractor driver, but protective glasses and dust mask should be worn.
The knives are driven via flat-belts from hydraulic geared motors; separate motors for horizontal and vertical cutters. The belts and the ball-bearings are maintenance-free. The rpm is between 2500 and 3000. It runs without vibration.
The model AL2 requires an oil flow of 13 to 15 litres per minute, with between 60 and 110 Bar pressure. To avoid over-heating of the oil, there should be more than 5 litres of oil in the tractor hydraulic reservoir. The maximum permitted oil pressure in the motor intake and hydro cylinders is 210 bar; the maximum in the motor return feed is 1.5 bar. For this hydraulic drive a one-way spool-valve is necessary (there is usually one on the tractor). When coupling to this valve it is important that the oil returns directly and freely back to the reservoir (not via the spool-valve) so that the oil stays cooler.
The height setting is hydraulically controlled; the vertical height adjustment distance is 80 cm. A one-way double-acting spool-valve is necessary on the tractor for the hydraulic height setting.
There is also hydraulic operation for side tilt adjustment (+- 20 degrees); a third (double-acting) spool-valve is needed. These two spool-valves are usually together in a unit which mounts forward of the driver (to his right-hand-side), this is like a gear-stick with forward and backward movement to control the height and side to side movement to control the side-tilt.
Included is an adaptor for the tractor and a storage frame to assist in safely fitting and removing the implement.
There are models for right or left side mounting.
The total weight is 125 kilos, but this is for the 3 parts.