Sided wood cutter SL2
Sided wood cutter companies OSTRATICKÝ is a special machine designed to cut branches mechanization especially in orchards, forest and partly in the municipal economy throughout the growing season.
The base machines are sturdy cutting boards equipped with a set of saw blades mounted on a special lifting equipment. Saw blades for cutting blades are powered by a specially designed hydraulic motor with power distribution to individual rotors using belt transmission.
It provides not only energy transfer between the drive and hydraulic motor rotors, but also serves as a circuit breaker overload the machine during cutting.
The base machines are sturdy cutting boards equipped with a set of saw blades mounted on a special lifting equipment. Saw blades for cutting blades are powered by a specially designed hydraulic motor with power distribution to individual rotors using belt transmission.
It provides not only energy transfer between the drive and hydraulic motor rotors, but also serves as a circuit breaker overload the machine during cutting.
OSTRATICKY wood cutter cutting strips can be fitted with a working width of 0.92 to 2.30 m, according to the required width and shape of the cut. With high-speed rotors mounted saw blades with relatively fine teeth and a special feeder can be used as a machine for cutting wood matured during the dormancy period and also cut green shoots during the growing period.
Moving and setting space-section provides specially designed lifting device controlling electro-hydraulic circuit from the tractor cab. It is easy to use and always convenient location of the controls in the tractor cab. The main advantage of the lifting device SL2 is its great flexibility and the possibility of easy adjustment of the cutting plane of the sheet in a wide range, both horizontally and vertically and in any inclination.
Correction and adjustment of working dimensions - ejecting, lifting and adjusting the inclination of the cutting blades is easily controlled directly by the driver. Electro-hydraulic control of all functional parts allows a high variability in the selection of the drive unit and if sufficient hydraulic power can propel OSTRATICKÝ wood cutters directly from the hydraulic system of the tractor or vehicle on which the cutter is suspended. Tractor carriers, which do not have sufficient hydraulic power required for reliable and smooth operation of the cutter can be supplemented by an independent source of hydraulic power driven from the PTO shaft of the tractor.
This solution allows better positioning of the machine and while the power saw blades and further increase the working performance of the machine. The maximum safe movement outside of a robust mechanical design care also locks fitted as standard hydraulic cylinders, which, even in the case of source failure or damage some of the functional parts to prevent the fall of the work tool to the ground and its destruction. OSTRATICKÝ SL2 wood cutters are manufactured in the rear suspension design for the rear hitch, on request, the machine can also compile aggregate face - hanging in front linkage or on the tractor frame or carrier system.
Moving and setting space-section provides specially designed lifting device controlling electro-hydraulic circuit from the tractor cab. It is easy to use and always convenient location of the controls in the tractor cab. The main advantage of the lifting device SL2 is its great flexibility and the possibility of easy adjustment of the cutting plane of the sheet in a wide range, both horizontally and vertically and in any inclination.
Correction and adjustment of working dimensions - ejecting, lifting and adjusting the inclination of the cutting blades is easily controlled directly by the driver. Electro-hydraulic control of all functional parts allows a high variability in the selection of the drive unit and if sufficient hydraulic power can propel OSTRATICKÝ wood cutters directly from the hydraulic system of the tractor or vehicle on which the cutter is suspended. Tractor carriers, which do not have sufficient hydraulic power required for reliable and smooth operation of the cutter can be supplemented by an independent source of hydraulic power driven from the PTO shaft of the tractor.
This solution allows better positioning of the machine and while the power saw blades and further increase the working performance of the machine. The maximum safe movement outside of a robust mechanical design care also locks fitted as standard hydraulic cylinders, which, even in the case of source failure or damage some of the functional parts to prevent the fall of the work tool to the ground and its destruction. OSTRATICKÝ SL2 wood cutters are manufactured in the rear suspension design for the rear hitch, on request, the machine can also compile aggregate face - hanging in front linkage or on the tractor frame or carrier system.
|
Type |
PNP 040 |
PNP 050 |
PNP 240 |
PNP 250 |
|
Number of saw blades (rotors): |
||||
|
The top bar |
0 |
0 |
2 |
2 |
|
The vertical bar |
4 |
5 |
4 |
5 |
|
The bottom line |
0 |
0 |
0 |
0 |
|
Working width |
2 Rotor Blades = 70 cm |
|||
|
3 rotor blades = 100 cm |
||||
|
4 rotor blades = 130 cm |
||||
|
5 rotor blades = 160 cm |
||||
|
Slinging post |
Type the U.S. |
|||
|
hydraulic lift, hydraulic tilting |
||||
|
The technical data are informative,
the manufacturer reserves the right to change the design of machinery and
equipment without prior notice. |
||||
Accessories: independent hydraulic unit